A design combining the upper two-bladed strong attack with the lower two-bladed parry defence, possessing both offensive and defensive capabilities.
Three upper BLADES knock the opponent diagonally upwards. The metal coating improves its performance.
A left spinning BEY equipped with 4 attack BLADES with high repelling performance.
Five heavy-hitting BLADES with a large diameter are specialized steel BLADES that hit the opponent hard and make them lose their balance.
The large three-blade design produces high striking power.
Sharply-angled upper BLADES make it easier to get in close to the opponent and flip them from a low position. Enchance performance with metal-coating.
The 4-BLADE smash shape makes it easy to tilt the opponent. The metal is painted to improve performance.
Four smash BLADES make it easier to unbalance the opponent. The metallic coat boosts performance.
Designed specifically to repelling opponents in a single blow with its large, protruding attack BLADE. The metal is painted for improved performance.
A BLADE whose shape changes with rotational speed. In the early stages, it counters with protruding BLADES. In the final stages, it defends with a shape approaching a circle.
Six attack BLADES make it easier to unleash consecutive attacks.
A BLADE that has three functions: upper BLADE, damper BLADE, and smash BLADE to respond to various performances.
Designed with 4 BLADES specialized for counterclockwise rotation to powerfully hit opponents.
Equipped with a large rubber pad, its triple BLADES deliver a powerful strike.The metal finish enhances its performance.
A design combining a side surface for absorbing the opponent's attacks in rapid succession with an upward striking surface that repels the opponent when tilted. The metal has been painted, enhancing its performance.
The smooth circular double-bladed design deflects an opponent's attack while enhancing STAMINA.
The 60-blade disc shape produces incredible endurance, with a design specialised for long-term rotation.
Blow your opponent away with four large dragon BLADES. The metal has been painted to improve performance.
The eight downward-facing BLADES are excellent at preventing attacks from low positions.
With both a large and a small BLADE with different angles, it provides a defensive performance when horizontal and offensive performance when inclined.
A large two-bladed BLADE with multiple striking areas, designed specifically for intense uppercut attacks from a low position.
Excellent at strongly repelling opponents due to the three weighted BLADES.
The 8 downward-sloping attack BLADES are designed to defend against attacks from low position.
Designed with six trapezoidal-shaped BLADES to provide a counter while fending off an opponent's attack.
Three metal balls built into the circular 12-BLADE move vertically to soften impact. The metal is painted for improved performance.
Designed with an internal centre of gravity structure with a large launcher hook, making it difficult to be pushed away by an attack.
A gimmick in which a small metal BLADE opens and closes, allowing its attack power to change depending on the attack pattern. Metal is painted and performance is improved.
It consists of 7 vertical thick attack BLADES and has extremely high defensive capabilities.
It is designed to suppress the opponent from above with its 6 inverted BLADES, reducing their endurance.
During X-DASH, the BLADE transforms from a circular 6-BLADE with high defensive performance to a 3-BLADE with high attack performance.
With a single large sword-shaped BLADE, it excels in hitting opponents with great force.
Designed to bounce and damage opponents with its 3 upper-shaped BLADES.
Designed to aim for a burst with powerful upper attacks from three large swords.
Three light-weight upper BLADES allow for quick attacks. The metal is painted to improve performance.
Three heavy BLADES which easily deflect the opponent. The metallic coat boosts performance.
Designed with two circular BLADES that balance centrifugal force endurance and parry defense.
Specially designed rubber BLADES to knock opponents away using the friction and rebound power.
The small diameter zero BLADE is designed to reduce stamina loss when attacked by an opponent.
With a smooth 3-BLADE shape, it is specially designed to deflecting the opponent's attacks.
A design that combines offensive and defensive BLADES, allowing for a variety of launching styles.
Four streamlined BLADES which reduce air resistance, allowing for sustained spinning.
The protruding designs around the steel BLADE can effectively resist attacks.
The thick steel BLADE can disrupt the opponent's balance from a higher striking point. The metal coating improves its performance. © FC BARCELONA
The rigid, low-centre-of-gravity structure with a narrow profile enables a design that withstands opponent attacks effectively. The metal finish enhances performance.
The upper and lower parts of the blade have different performance, with the upper part being better for attacks with less stamina loss, and the lower part being better for counters.
It has eight thick BLADES that protrude upwards and downwards, and delivers irregular strikes. The metal part is painted for improved performance.
With six downward facing jagged BLADES, it is excellent at draining the opponent's rotational power.
The design features a center of gravity structure concentrated in the small diameter, making it resistant to losing balance even when subjected to impact.
The free rotating ring at the bottom of the BLADE rotates, allowing it to deflect attacks and maintain rotational force.
A design that emphasizes upper attacks, with three upper BLADEs pointing left.
The 9 striking BLADES are arranged in a circular structure/pattern which disperses and repels attacks from various directions.
Two horizontal BLADES yield a balanced structure with high ATTACK and STAMINA.
The asymmetrical BLADE design offers both excellent attack and defensive abilities.
The 5-BLADE shape with an external center of gravity and large diameter is specially designed to generate centrifugal force.
Six pointed downward-facing BLADES make it easier to chip away at the opponent's STAMINA from above.
Performance varies depending on HEIGHT, with lower BLADES optimised for evasion and upper BLADES for repelling opponents. Enchance performance with metal-coating.
Resistant to unbalancing even by powerful impact, thanks to metal on the inside shifting the center of gravity inward.
Two round BLADES, designed for both offense and defense.
The thick smash BLADE is designed specifically to smash opponents into the stadium.
High BLADE position makes it easier to hold back the opponent's attacks.
Two large disc BLADES allow for an outward-leaning weight, resulting in a strong centrifugal force.
Six defensive BLADES structured to improve shock-absorption.
Designed for excellent counter performance using 15 thick BLADES with high rapid-strike capability. The metal is coated to enhance performance.
The structure is made up of nine BLADES that increase in size in stages, allowing for a series of strikes as well as strong attacks.
A design that combines three large upper BLADES with an aerodynamic structure that creates downforce.
Designed to sap the opponent's STAMINA through its four downward-pointing, serrated BLADES.
A smooth-shaped rapid-strike BLADE with weight concentrated around the BLADE's periphery, achieving both high endurance and offensive performance.
A heavyweight eight-bladed design featuring multi-faceted, sharp-angled edges on the sides to reduce the opponent's rotational force. The metal has been painted to enhance performance.
A BLADE that can be changed into two modes by flipping it over. In upper mode, the five-blade BLADE is excellent for attacks that bounce off opponents, while in smash mode, the ten-blade BLADE is excellent for defence that knocks off opponents' attacks.
Designed to create strong centrifugal force with two arc-shaped BLADES that place the metal weight on the outside.
Excellent at bouncing off opponents with its three streamlined, heavy BLADES. The metal has been painted to improve performance.
Smooth circular shape, low aerodynamic drag, and excellent endurance performance.
Designed to receive and repel attacks with 6 continuous BLADES in a wavy shape.
Designed with a large 3-BLADE smash shape and aerodynamic structure. The metal has been painted to improve performance.
Four BLADES with an undulating smash shape, designed to disorientate the opponent with a series of strikes.
A heavyweight five-BLADE design offering superior striking performance. Combined with a large BLADE featuring an offset centre of gravity, it enhances heavy-hitting capabilities.
The design employs a shape with varying elevations to disperse the opponent's attacks, generating counter-strikes through the three-dimensional BLADE form.
A streamlined, smooth BLADE designed to deflect an opponent's attack and minimise rotational loss.
One of the five BLADES serves as the heavy strike point, enhancing the BLADE's deflection performance.
Designed with 12 vertically extending BLADES to prevent attacks on the RATCHET and enhance burst resistance.
A structure enabling sustained attacks that leverage endurance while minimising stamina loss through smooth, rapid-strike BLADES.
The heavy 12 BLADES arranged in a circular formation are designed to deflect attacks and high endurance.
Excellent performance in disrupting the opponent's stance with a series of strikes with 5 large-diameter smash-shaped BLADES.
Three BLADES with a small diameter and an internal centre of gravity for superior stability.
Change the mode from a continuous attack to a passive attack by flipping the outer BLADE over.
The outer ring's rotating mechanism is designed to deflect incoming attacks and maintain STAMINA.
Featuring metal components to enhance centrifugal force, this low-profile six-BLADE design boosts impact power and stability.
The mode can be changed to upper or smash by flipping the outer BLADE over.
The centrifugal force of the BLADE is increased by the circular BLADE with a hollowed out inside.
The low center of gravity 9-BLADE, which extends downwards, makes it excellent for diving continuous strikes.
Three thick BLADES yield high repelling performance.
The thick, cylindrical BLADE is designed to continue to repel attacks from any height.
It has 3 BLADES with a low height and high repelling performance, and it has excellent attack performance by taking advantage of its low centre of gravity.
It uses a damper-shaped BLADE that easily absorbs shock to soften and parry the opponent's attacks.
A design that enhances playability by shifting the centre of gravity.
Three large BLADES are positioned facing upwards, achieving powerful counter performance that deflects smash attacks from opponents.
Designed with a thin, smooth shape to reduce air resistance while maintaining rotational force.
A component for setting the BEY low. Features a single-BLADE design specialised for offensive performance.
A component for setting the BEY height to the middle position. Features a large diameter and employs eight BLADES for enhanced centrifugal force.
BEY set low. It has a simple structure that does not change burst resistance depending on the BIT, has less wobbling, and uses 4 BLADES with a well-balanced center of gravity.
A part that sets the the BEY to the middle height. Adopts a two-BLADE shape that makes it easy to dodge attacks when rotating clockwise.
A part to set the BEY lower allowing the single BLADE design to optimized its attack performance.
A part set low on the BEY. Uses nine BLADES optimised for consecutive attacks.
Included in. Sets the BEY higher and adopts a single-BLADE design specialized in attack performance.
A part to set the BEY's height to middle. Enhanced with three BLADES for high elasticity performance.
A part set high on the BEY. Ultilise the 9 BLADES that is excellect in continous strikes.
A part to set the BEY height to middle. Uses four BLADES optimised for evasion.
Sets the BEY lower, allowing seven thick vertical BLADES to provide excellent defensive abilities.
A part that sets the BEY higher. It has a simple structure with burst resistance that does not change depending on the BIT, utilising a 3-BLADE design that reduces shaking and evades attacks.
The RATCHET sets the BEY higher. It has two BLADES that make it easier to deflect attacks when spinning right.
Included in. Sets the BEY lower, with two BLADES that make it easier to deflect attacks when rotating clockwise.
A component for setting the BEY low. A simple RATCHET design with minimal play, achieved through a structure that ensures consistent BIT burst resistance. Features seven thick BLADES offering superior protective performance.
A part set low on the BEY. Uses four BLADES optimised for evasion.
A part that sets the height of the BEY to medium height. Uses 9 BLADES that are excellent for continuous attacks.
A part set high on the BEY. Uses four BLADES optimised for evasion.
RATCHET sets the BEY low. 6 BLADES with two types of BLADES arranged alternately to improve playing performance.
A component for setting the BEY low. Features a 0-BLADE design for enhanced resistance to horizontal attacks.
Parts to set the BEY higher. Simple type of RATCHET with a simple joint, which has less blurring due to a structure that makes the BIT's burst resistance constant. Metal parts increase weight.
A part set low on the BEY. Uses five BLADES generating powerful centrifugal force.
Parts that set the BEY low. A simple RATCHET with minimal wobble thanks to a structure that keeps the BIT burst resistance constant. Features 9 BLADES that are great for rapid firing.
A part that sets the BEY height to the middle. thes seven thick vertical BLADES provide excellent defensive performance.
A part to set the BEY height to middle. Adopts 5 BLADES with thick and excellent centrifugal force.
Parts for setting the height of the BEY at mid-level, with six BLADES that have enhanced repelling performance by alternating two types of BLADES.
Parts to set the BEY low. Features four BLADES to easily repel attacks.
Parts that set the BEY height to medium. Features a single BLADE specialising in attack performance.
A part set low on the BEY. Uses three BLADES optimised for repelling opponents.
A part set high on the BEY. Uses five BLADES generating powerful centrifugal force.
RATCHET set the BEY higher. Adopts 6 BLADES with two types of BLADES arranged alternately to improve playing performance.
The RATCHET sets the BEY at a high height with 0-BLADE design to resist horizontal attacks.
Sets the BEY in the middle position and adopts a 0-BLADE that easily withstands attacks from horizontal directions.
This RATCHET is meant to hold the BEYBLADE in a defensive position with 7 vertical BLADES.
A part set high on the BEY. Uses three BLADES optimised for repelling opponents.
The large cylindrical shaft end, featuring multiple protrusions, grips firmly to the stadium, enabling high-speed manoeuvrable attacks.
Designed 2mm lower than the N BIT, it lowers the center of gravity of the BEY and perform counter attack from a low position.
A design that achieves both endurance performance through a large spherical shaft tip and attitude control performance via weights projecting in four directions.
The blunt-edged shaft tip is wrapped with a high-friction rubber material, providing both grip and endurance.
Designed to enable high-speed attacks by increasing the grip on the stadium when rotating clockwise with a thick, flat, spiral-shaped shaft tip.
BEY runs on a flat axis, making X-DASH easier to perform.
Included in. The gear is right at the end of the axis, allowing for sharp turning and high-speed X-DASH.
Combination of a flat shaft tip and large gears to enhance X-DASH performance.
The design with a large axis makes it easy to maintain stability. When performing an X-DASH, the tip of the axis rises up, allowing for a powerful smash attack.
A finely pointed tip allows it to hold position at the center of the Stadium, increasing counter chances.
Combines a large ball-shaped axis which maintains stance and a gear which extends right to the edge, allowing for counters.
The tip of the shaft is diagonally cut, creating an irregular movement that bounces.
Included in. The P BIT gear extends right to the edge, allowing for quick movement changes.
The area around the shaft tip of the bluntly pointed W BIT is enclosed by a cylindrical wall, further reducing the BEY’s tendency to tilt.
A small, semicircular tip reduces friction and ups STAMINA.
Multiple protrusions on the tip of the BIT increases the friction with the stadium, making it difficult to be knocked out when attacked.
The obtuse-angled shaft tip makes it difficult to tilt, and the 10-tooth gear reduces stamina loss when sprinting.
The flat, spiral-shaped tip of the shaft reduces friction with the stadium when rotating clockwise, allowing for attacks with increased endurance.
P-BIT has a height mode change function. The height also changes when performing X-DASH during battle.
The low-friction hemispherical shaft tip stabilizes the posture and improves rotational durability.
The design is set 1mm lower than the original R-axis, and is good at launching upper attacks
Designed to run around the stadium at high speed by increasing ground friction with a flat rubber shaft tip.
Combines attacks that minimise STAMINA loss through a slender, flat shaft tip with high-speed X-DASHES enabled by large gears.
A narrow-ended axis allows for strong ATTACK at the start and good STAMINA at the finish.
A ball-shaped axis allows for good mobility to avoid attacks, and high STAMINA.
A pointed axis allows the BEY to tilt, improving countering.
A 1mm decrease in height over the F BIT improves X-DASH acceleration.
A protrusion at the center of the flat tip allows for shifting from dynamic to static action.
Designed to produce centrifugal force and viscous rotation with a disk-shaped weight B BIT.
A structure allowing selection between a defensive mode, featuring four deflecting BLADES and a slender shaft tip to withstand attacks, and an offensive mode, featuring two aerodynamically structured BLADES and a thick shaft tip for manoeuvring.
A 1mm increase in height over the N BIT allows for more tilt and better countering.
A BIT that rotates freely relative to the RATCHET. Designed to reduce rotational loss with a narrow, spherical shaft tip.
Included in. Gears are extended with the pointed shaft tip, designed to easy X-DASH while defending in the center of the stadium.
A 10-tooth gear lowers X-DASH speed, but allows for a higher number of DASHES.
K-BIT with height mode change function. The height can also be changed with an X-DASH during battle. The angular shaft-tip sides can be used to deploy both continuous attacks and counter defences.
Designed 1mm lower than the O BIT, achieving improved durability due to a lower center of gravity.
Designed 2mm lower than the F-BIT, lowering the center of gravity of the BEY and enabling attacks from a lower position.
The tip has three different heights, allowing for three different attack speeds: low, medium, and high.
When rotating at high speed, it maintains stable motion with a fine shaft tip, and when rotation slows down, it transforms into a thick shaft tip and re-accelerates, enabling an X-DASH.
Designed with a cylindrical wall around the shaft tip of the B BIT to prevent tilting of the BEY.
A 1mm increase in height over the T BIT allows for higher smash power and stamina.
The tip of the N-axis is made of metal to increase weight and reduce friction to increase rotational stability.
Designed with a sharp tip that sinks vertically into the RATCHET to absorb the impact of landing.
Kicks the inside of the stadium with angled shaft-tip sides, enabling movement leading to continuous attacks and counter-defence.
Designed to extend the gear of the R-BIT to the tip to improve the ease of hooking onto extreme lines.
The spherical shaft tip has both a flat bottom and a protruding tip, which can realize three types of running trajectories: dodging, sprinting and counterattack.
A design combining dynamic attack with a flat shaft, equipped with a large gear and static defense with a central protrusion.
Designed with 6 flat surfaces on the shaft tip side to suppresses the tilting of the BEY helps to keep it in a stable position at all times.
Bahamut model locking parts for securing the CX BLADES.
The lock component for the knight model securing the CX BLADE.
The locking component for the Ragna model securing the CX BLADE.
A Phoenix-model LOCK CHIP that secures the CX BLADE.
Locking parts for the Pegasus model that secure the BLADES of the CX.
Sol model lock parts that secure the CX BLADES.
Lock component for the Leon model securing the CX BLADE.
Wolf model locking component for securing the CX BLADE.
The lock component for securing the CX BLADE on the Emperor model. The LOCK CHIP whose weight has increased due to the metal parts.
Wizard model lock parts that secure the CX BLADE.
Hells model's locking parts secure the CX BLADES.
Cerberus model locking parts to fix CX BLADES.
Locking parts for the Whale model that secure the BLADES of the CX.
Valkyrie model locking parts to secure CX BLADES. LOCK CHIP with increased weight due to metal parts.
Dran model's locking parts secure the CX BLADE.
Fox model's locking parts secure the CX BLADES.
Rhino model's locking parts secure the CX BLADES.
Perseus model lock parts that secure the CX BLADE.